H3C XE 200/2000 IP, Operation Manual

Page: 406 / 514

Operation Manual – Call Services
H3C XE 200/2000 IP PBX
Chapter 10 Call Forwarding Services
10-3
Table 10-2 Check specified CFU target number on the telephone set
Step Expected result
Pick up the phone. The subscriber can hear the dial tone.
Dial *#57*.
If the specified number is set as the target number,
the subscriber can hear the ringback tone or the
voice prompt “You have already activated call
forwarding unconditional service. Your forward
number is
XXXX ”. ( XXXX refers to the number the
subscriber set).If not target number is set, the
subscriber will hear the busy tone or the voice
prompt “Sorry, your attempt to activate the service
was unsuccessful.”
If the CFU service is not enabled, the subscriber will
hear the busy tone or the voice prompt “Sorry, your
attempt to activate the service was unsuccessful.”
Hang up the phone. —
III. Deleting all CFU forwarding numbers on the telephone set
The following table describes how to delete the CFU forwarding number.
Table 10-3 Delete all CFU forwarding numbers on the telephone set
Step Expected result
Pick up the phone. The subscriber can hear the dial tone.
Dial #57#.
If target numbers are deleted, the subscriber can
hear the ringback tone or the voice prompt “You
have deactivated the service.”
If no target number is available for deletion, the
subscriber will hear the busy tone or the voice
prompt “Sorry, the service is not available.”
Hang up the phone. —
Caution:
Be cautious about the deletion, for all the CFU forwarding numbers will be deleted by
this operation.