manualshive.com logo in svg

H3C XE 200/2000 IP, Operation Manual

The H3C XE 200/2000 IP is a cutting-edge networking device that offers superior performance and reliability. Its operation manual is available for free download from manualshive.com, providing users with comprehensive instructions and guidance to optimize their experience with this exceptional product.

Share
Download
background image

Operation Manual – Call Services 
H3C XE 200/2000 IP PBX

 

Chapter 27  Appendix

 

27-11 

Service 1

 

Service 2

 

Nested relationship

 

Multiple called parties 

The multiple called parties 
service is supported when they 
are registered with the local XE 
IP PBX. 

Call pickup 

Subscriber management 

The subscriber management 
service is supported. 

Inter-group call restriction 

The call pickup service is only 
restricted by the call restriction 
relationship in the direction 
from the calling party to the 
party with the call pickup right. 

Outgoing call authority 
control

 

The call pickup service is 
restricted by the outgoing call 
authority from the calling party 
to the party with the call pickup 
right on the local XE IP PBX.

 

Abbreviated dialing

 

The abbreviated dialing service 
is supported.

 

Do-not-disturb

 

The call pickup service is not 
restricted by the do-not-disturb 
service.

 

Time limit call

 

The time limit call service is 
supported.

 

Password call

 

The call pickup service is not 
restricted by the password call 
service.

 

Call forwarding 

The call pickup service is 
applicable to the forwarded-to 
number of all call forwarding 
services.

 

Third party call control

 

The call pickup service is 
applicable to a call locally 
originated by using the 3PCC 
service.

 

Callback-on-busy

 

The call pickup service is 
applicable to a call originated 
by using the callback-on-busy 
service only on the local XE IP 
PBX.

 

Dialing test

 

The dialing test service is 
supported.

 

 

CPCP

 

The CPCP service is 
supported.

 

Summary of Contents for XE 200/2000 IP



































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for XE 200/2000 IP

Panasonic KX-TDE200NZ User Manual preview
KX-TDE200NZ
Brand: Panasonic Pages: 250
Panasonic KX-HGT100-B Brochure & Specs preview
KX-HGT100-B
Brand: Panasonic Pages: 8

Brands by name

Popular brands

Load more brands