Operation Manual – Feature
H3C XE 200/2000 IP PBX
Chapter 4 VoIP RADIUS Accounting Configuration
4-5
Caution:
Make sure that the specified source IP address is the IP address of some interface on
the XE IP PBX, and the server maintains the route to that IP address.
Perform the following configuration in system view.
Table 4-6
Specify the source IP address for the transmitted RADIUS packets
Operation
Command
Configure the source IP address for the transmitted
RADIUS packets
radius source-address
ip-address
Remove the source IP address specified for the
RADIUS packets to be transmitted
undo radius
source-address
By default, no specified source IP address is configured for sending RADIUS packets.
4.3.7 Enabling/Disabling Accounting Process for Office Devices
After the accounting process is enabled for office devices, when a user on an office
device calls a user in the LS domain, accounting will be implemented on the calling user.
Perform this configuration with care to avoid repeated accounting on calling users.
Perform the following configuration in LS-OFFICEGROUP-OFFICE view.
Table 4-7
Enable/disable accounting process for office devices
Operation
Command
Enable accounting process for office devices
acct enable
Disable accounting process for office devices
acct disable
Summary of Contents for XE 200/2000 IP
