Order No. 2104 ..
2.3 Fitting and electrical connection
DANGER!
When mounting with 230 V devices under a common cover, e.g. socket outlets,
there is a danger of electrical shocks in the event of a fault!
Electrical shocks can be fatal.
Only use the preassembled plastic screw as locking screw!
CAUTION!
Electrostatic discharges
Device damage.
Only operate the device with cover.
Mounting and connecting the device
Figure 2: Device fitting
(1) Device connection terminal insert
(2) Design frame
(3) Electronics cover
(4) Cover
(6) Locking screw (plastic)
Observe the routing conditions for SELV.
Do not route input cables parallel to mains cables. Otherwise there might be signal interference.
Recommendation: Use a deep appliance box!
The optimum installation height is approx. 1.5 m.
o
Removing the cover (4) (Figure 2).
o
Isolate device connection terminal insert (1) from electronic insert (3).
Page 8 of 171
Mounting, electrical connection and operation