Order No. 2104 ..
Figure 3: Device connection terminal insert with connections
(8) Connecting strip binary inputs
(9) KNX connection
o
Insert the stripped bus line into the device connection terminal (9) in the device connection
terminal insert (Figure 3)
Figure 4: Connection of binary inputs
1..3 Not assigned
4
Connection binary input E1
5
Connection binary input E2
6
Reference potential E1, E2
o
Window contacts, NO contact or NC contact push-buttons can be connected to device
connection terminal 4, 5 and 6 of the connecting strip binary inputs (8).
o
Insert device connection terminal insert (1) in appliance box. Note label OBEN / TOP. The
bus connection must be to the right and below.
o
Fit the Design frame (2) on device connection terminal insert (1).
o
Insert the electronics cover (3) into the device connection terminal insert in the correct
orientation.
o
Fasten the electronics cover with the locking screw (6).
Page 9 of 171
Mounting, electrical connection and operation
