Order No. 2104 ..
Lead dew point alarm
(0...5) * 1K
0...
2
...5
The alarm threshold is defined here
before reaching the dew point
temperature.
Switch-off hysteresis
(0...5) * 1K
0...
1
...5
The alarm hysteresis is defined here,
i.e., starting from the alarm threshold
set, how many Kelvin the temperature
must decrease by before the alarm is
stopped.
Number and type of
alarm objects
1 switching object
1 value object
2 switching objects
2 value objects
1 switching object and 1
value object
Determines the type and number of
configured alarm objects.
Switching command for
dew point alarm
ON
OFF
This parameter defines the command
that should be output during dew point
alarm.
Only when "Type of alarm objects" =
switching object"
Value for dew point
alarm active
(0...100) * 1%
0...
100
This parameter defines which value
should be output during an active dew
point alarm.
Value for dew point
alarm inactive
(0...100) * 1%
0
...100
This parameter defines which value
should be output during an inactive dew
point alarm.
Page 124 of 171
Software "KNX CO2 sensor"
Parameters
