Order No. 2104 ..
Switching command for
logic 1
OFF
ON
This parameter defines which switching
command should be transmitted to the
bus for a logical "1" on the logic gate
output.
This parameter is only visible when the
gate output is configured as "switching
object".
Value for logic 0
0
...255
This parameter defines which value
should be transmitted to the bus for a
logical "0" on the logic gate output.
This parameter is only visible when the
gate output is configured as "value
object".
Value for logic 1
0...
255
This parameter defines which value
should be transmitted to the bus for a
logical "1" on the logic gate output.
This parameter is only visible when the
gate output is configured as "value
object".
Page 169 of 171
Software "KNX CO2 sensor"
Parameters
