Order No. 2104 ..
will be transmitted.
Only with "Transmit value on = falling
edge (push-button as NC contact)" and
"Transmit value on = rising and falling
edge (switch)"!
With "transmit current input state" the
current input state of the inputs is
transmitted according to the
configuration for the rising and falling
edge.
Only with "Transmit value on = raising
and falling edge (switch)"!
Behaviour at the end of
the disabling function
no reaction
Reaction as rising edge
Reaction as falling edge
Transmit current input
status
This parameter determines the reaction
executed at the end of the disabling.
With "no reaction", no reaction occurs.
With "Reaction as with rising edge", the
value parameterized for the rising edge
will be transmitted.
Only with "Transmit value on = rising
edge (push-button as NO contact)" and
"Transmit value on = rising and falling
edge (switch)"!
With "Reaction as with falling edge", the
value parameterized for the falling edge
will be transmitted.
Only with "Transmit value on = falling
edge (push-button as NC contact)" and
"Transmit value on = rising and falling
edge (switch)"!
With "transmit current input state" the
current input state of the inputs is
transmitted according to the
configuration for the rising and falling
edge.
Only with "Transmit value on = raising
and falling edge (switch)"!
h
Push button interface -> Channel 2
Channel 2
See channel 1!
h
Push button interface -> Channel 2 -> Disable
Channel 2 - Disable
Page 164 of 171
Software "KNX CO2 sensor"
Parameters
