Order No. 2104 ..
transmission always occurs regardless
of the object value.
Time base for cyclical
transmission of
switching object 1.1
1 sec
2.1 sec
4.2 sec
8.4 sec
17 sec
34 sec
1.1 min
2.2 min
4.5 min
9 min
18 min
35 min
1.2 h
Determines the time base for the cyclical
transmission via the switching object
1.1.
Time = Basic x Factor
Time base for cyclical
transmission of
switching object 1.2
1 sec
2.1 sec
4.2 sec
8.4 sec
17 sec
34 sec
1.1 min
2.2 min
4.5 min
9 min
18 min
35 min
no cycl. Transm. via
switching object X.2
Determines the time base for the cyclical
transmission via the switching object
1.2.
The cyclical transmission via the
switching object 1.2 can be disabled if
"no cycl. transmission via switching
object X.2" is selected"!
Time = Basic x Factor
Time factor for cyclical
transmission of
switching object 1.1 and
1.2
Factor (3...127)
3...
60
...127
Determines the time factor for the
cyclical transmission via both switching
objects.
Time = Basic x Factor
Presetting: 1 s × 60 = 60 s
Behaviour after bus
voltage
return
no reaction
Send ON telegram
Send OFF telegram
Transmit current input
status
It is possible to specify which reaction
should take place after bus voltage
return. The configured delay time after
reset or bus voltage return must first
have elapsed before the pre-set reaction
is executed here.
With "no reaction", no reaction occurs.
With "transmit current input state" the
current input state of the inputs is
transmitted according to the
configuration for the rising and falling
edge.
With "transmit ON telegram" an "ON" is
transmitted.
Page 144 of 171
Software "KNX CO2 sensor"
Parameters
