Order No. 2104 ..
The following
parameters for the logic
gate inputs are
available in the same
way for each configured
input (1...4).
Connection
external input object
Humidity measurement -
LV1
CO2 measurement - LV1
Humidity measurement -
LV2
CO2 measurement - LV2
CO2 measurement - LV3
CO2 measurement - LV4
Dew point alarm1
(Switching)
Dew point alarm2
(Switching)
Logic gate1 - Output1
(Switching)
Logic gate1 - Output2
(Switching)
Logic gate2 - Output1
(Switching)
Logic gate2 - Output2
(Switching)
Logic gate3 - Output1
(Switching)
Logic gate3 - Output2
(Switching)
Logic gate4 - Output1
(Switching)
Logic gate4 - Output2
(Switching)
This parameter defines with which logic
gate output, dew point alarm object or
limiting value object the corresponding
input of the gate is connected (internal
connection). In addition to the internal
connection possibilities, an external 1-bit
communication object can also be
assigned to the input of the gate (setting
"external input object").
Make sure that the configured internal
connection is also possible, the selected
logic gate output, dew point alarm or
limiting value is also present and thus
available!
Behaviour
Normal
inverted
This parameter defines whether the gate
input is evaluated normal or inverted.
h
Logic gate -> logic gate x (x = 1...4) -> Output / Outputs
The following
parameters for the logic
gate outputs are
available in the same
way for each configured
output (1...2).
Switching command for
logic 0
OFF
ON
This parameter defines which switching
command should be transmitted to the
bus for a logical "0" on the logic gate
output.
This parameter is only visible when the
gate output is configured as "switching
object".
Page 168 of 171
Software "KNX CO2 sensor"
Parameters
