Order No. 2104 ..
4.2.4.2.9 Disabling function of the Inputs
A specific reaction can be executed independently for each input at the beginning and end of a
disable.
In so doing, it is possible to configure to "No reaction". Only in this case are dimming or venetian
blind control operations or value adjustments completed during an active disable. In all other
cases, the configured command is transmitted instantly at the beginning of the disable.
Furthermore, edges or signals on the corresponding inputs are not evaluated during an active
disable! Updates on disabling objects (disable or enable) cause the transmission every time of
the corresponding configured command "at the beginning or end of the disable".
i
For "switching" function: During an active disable, no cyclical transmissions take place via
the disabled input. If a cyclical transmission took place prior to activating the disabling
function, no cyclical transmission will take place any more at the end of the disable in the
configuration "no reaction". In this case, the object value is first transmitted cyclically again
after an update on the switching object. In all other cases, the object value is transmitted
cyclically again after the end of the disable.
Page 53 of 171
Software "KNX CO2 sensor"
Functional description
