Order No. 2104 ..
Function as
Dimming value
transmitter
Light scene extension
without memory function
Light scene extension with
memory function
Temperature value
transmitter
Brightness value
transmitter
Determines the function to be executed.
Value transmitter
function = "Dimming
value transmitter"
Transmit value on
rising edge (push-button
as NO contact)
falling edge (push-button as
NC contact)
rising and falling edge
(switch)
Specifies the edge which starts an
actuation.
Value on rising
edge(0...255)
0...
100
...255
Specifies the value transmitted on a
rising edge.
Only with "Transmit value on = rising
edge (push-button as NO contact)" and
"Transmit value on = rising and falling
edge (switch)"!
Value on falling
edge(0...255)
0
...255
Specifies the value transmitted on a
falling edge.
Only with "Transmit value on = falling
edge (push-button as NC contact)" and
"Transmit value on = rising and falling
edge (switch)"!
Adjustment via long
actuation?
Yes
No
With a long press (< 5 s), the current
value can be cyclically reduced or
increased by the parameterized step
width (see below) and transmitted. After
this value adjustment, the value last
transmitted remains stored.
This parameter defines whether a value
adjustment is possible
Only with "Transmit value on = rising
edge (push-button as NO contact)" and
"Transmit value on = falling edge (push-
button as NC contact)".
Page 149 of 171
Software "KNX CO2 sensor"
Parameters
