Order No. 2104 ..
edge will be transmitted.
Only with "Transmit light scene number
on = falling edge (push-button as NC
contact)" and "Transmit light scene
number on = rising and falling edge
(switch)"!
With "transmit current input state" the
current input state of the inputs is
transmitted according to the
configuration for the rising and falling
edge.
Only with "Transmit light scene number
on = raising and falling edge (switch)"!
Disable for function
"Light scene extension
with memory function "
Disabling function
enabled
disabled
The disabling function can be enabled or
disabled.
Polarity of the disabling
object
Disable = 1 (Enable = 0)
Disable = 0 (Enable = 1)
This parameter sets the polarity of the
disabling object.
Behaviour at the
beginning of the
disabling function
no reaction
Reaction as rising edge
Reaction as falling edge
This parameter determines the reaction
executed at the beginning of the
disabling.
With "no reaction", no reaction occurs.
With "Reaction as with rising edge", the
value parameterized for the rising edge
will be transmitted. Only with "Transmit
light scene number on = raising edge
(push-button as NO contact)"!
With "Reaction as with falling edge", the
light scene parameterized for the falling
edge will be transmitted. Only with
"Transmit light scene number on =
falling edge (push-button as NC
contact)"!
Behaviour at the end of
the disabling function
no reaction
Reaction as rising edge
Reaction as falling edge
This parameter determines the reaction
executed at the end of the disabling.
With "no reaction", no reaction occurs.
With "Reaction as with rising edge", the
value parameterized for the rising edge
will be transmitted. Only with "Transmit
light scene number on = raising edge
(push-button as NO contact)"!
Page 161 of 171
Software "KNX CO2 sensor"
Parameters
