GE LOGIQ A100, Technical Publication

Page: 93 / 408

Scan Adjustments
77
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Freezing an Image
Freezing a real-time image stops all acquisition of
information into system memory. This allows for
measurements, annotations and printing.
Press FREEZE to freeze an image. The LED lights. To
reactivate the image, press FREEZE again.
Toggle FREEZE (Foot switch option) on and off by
pressing the footswitch. The freeze LED button lights up
on the console.
NOTE: Deactivating Freeze erases all measurements
and calculations from the display (but not from the report
page). Selecting a new probe unfreezes the image.
Annotating the Image
When COMMENT is pressed, the cursor appears. Move
the cursor using the trackball anywhere on the image
and use alphanumeric keys to enter comments. (Press
CONTROL–C to set Home position of cursor, if required).
Press
RETURN to move to the next line. Press
COMMENT again to terminate the function.
Erasing Annotations
Use BACKSPACE to erase individual characters to the
left of the cursor. Comments also get erased at power off
or when
CLEAR or NEW PATIENT are pressed.
A "
.