GE LOGIQ A100, Technical Publication

Page: 246 / 408

Cardiac Measurements
230
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
ta
Substitution of a LV measurement
A previous LV measurement like LVIDd, LVIDs or the
Heart Rate can be replaced independently without
repeating the whole sequence.
Example: After completion of the Cubed formula LV functions it
is realised that LVIDs has been erroneously measured.
To replace LVIDs without repeating the whole sequence:
Press [4]. The LVIDs item is highlighted. An open ended “ ”
cursor with a vertical line appears on the screen.
Use the TRACKBALL to move the open ended “ ” cursor to
either end of the starting point of LVIDs dimension.
Press SET to fix the start point cursor. A second open ended
“ ” cursor appears on the vertical line. It is moveable only in
the vertical axis.
Use the TRACKBALL to move the open ended “ ” cursor to
the end point of the LVIDs measurement.
Press SET to fix the end point cursor. The LVIDs is corrected
and the corresponding ESV, SV, EF, and CO are displayed.
TB
TB
4