GE LOGIQ A100, Technical Publication

Page: 314 / 408

Biopsy Procedures
298
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Multi-Angle Biopsy Guide Assembly (cont’d)
Push the knob down into the desired slot to secure the angle
position of the needle guide attachment.
Push
Î
Illustration 68. Fix the angle position
Hold the bracket in place on the probe when pushing the knob
to secure the angle position of the needle guide attachment.
Excessive force may cause the bracket to release from the
probe.
Place an adequate amount of coupling gel on the face of the
probe.
Place the proper sanitary sheath tightly over the probe and
biopsy bracket. Use the rubber bands supplied to hold the
sheath in place.
CAUTION