GE LOGIQ A100, Technical Publication

Page: 78 / 408

Patient Registration
62
LOGIQ
t
α
100 User Manual
2211157–100 Rev 0
Patient Registration Procedure (cont’d)
ID: (Up to 16 chars)
NAME: (Up to 28 chars)
NEW PATIENT
Return
Register and exit Register and exit
Abort/Exit
Press “New Patient” to enter new data and exit
Press “Clear” to cancel and exit
Illustration 13. New Patient Entry
NOTE: To modify only Patient Information without
erasing other data, press the ID/NAME key. Pressing
ID/NAME allows modification of patient data without
erasing patient image, measurements, calculations and
summary reports.
Pressing NEW PATIENT key twice, clears all patient
data, annotations, measurements, calculations and
summary report pages from the system’s memory.
Patient Scan Procedure
1. Position the patient in a lying down position and
apply Acoustic gel to the probe and on the
patient. Position the transducer on the patient,
adjust the imaging controls to produce a high
quality image.
2. Begin the scan on the patient.
.