GE LOGIQ A100, Technical Publication

Page: 44 / 408

Operator Controls
28
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Key Description
New Patient
Press NEW PATIENT at the beginning of each patient
study. Pressing the NEW PATIENT key prompts the
system for the new patient entry menu. Press CLEAR to
abort the new patient data entry if required. Pressing
NEW PATIENT a second time clears all previous patient
data, annotations, measurements, calculations and
summary report pages from the system’s memory and
accepts the new entry and exits the menu.
ID/Name
Press ID/NAME to enter or replace patient data without
changing the current status of the system. Pressing the
ID/NAME key enables the Patient Entry Menu. Enter
Patient ID/Name using alphanumeric keys. Press
CLEAR to abort the ID/Name menu if required. Press
ID/NAME a second time (or RETURN) to exit the menu
and display ID/NAME on the image display.
To avoid patient identification errors, always verify the
identification with the patient. Make sure the correct
patient identification appears on all screens and hard
copy prints.
Preset
Press PRESET to select the default scan parameters
stored for the probe connected. Parameters can be
predefined using the Control–W function.
Comment
Press COMMENT to enter comments anywhere on the
image area. Use the TRACKBALL, SPACE OR
RETURN to move the cursor.
Selection
Press
SELECTION to select a body pattern from the
currently active body pattern package. Pressing the
SELECTION key at the end of each menu (either
Abdomen or OB/GYN) takes you to the next Body
Pattern Package automatically.
WARNING
←