GE LOGIQ A100, Technical Publication

Page: 182 / 408

OB Measurements
166
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Heart Rate (Beats per minute)
HEART RATE in beats per minute is calculated by
measuring the interval between 2 heartbeats in the
M-Mode or B/M-Mode. If calculations are done in the
wrong mode an error message HR ILG will appear in the
Calculation Result Area. Four Heart Rate calculations
can be displayed in the Calculation Result Area of the
Display HR = 60 x 2/Lapsed time.
Select [3] in the Sub Menu. If the sub menu was used for
prior calculation, the system defaults back to the sub
menu when
MEASUREMENT is pressed.
Use the TRACKBALL to move the M-Mode measurement
cursor to the start point of measurement.
Press SET to fix the start point. A second M–Mode
measurement cursor appears.
Use the TRACKBALL to move the cursor to the end point
of measurement.
Press SET to fix the end point. The heart rate is
displayed on the left side of the screen in beats per
minute. Press
SET a second time to repeat procedure
for more measurements.
) )
3
TB
TB