GE LOGIQ A100, Technical Publication

Page: 77 / 408

61
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Patient Registration
Introduction
Turn ON the System by pressing the POWER Switch to
the “I” (ON) position. The system beeps once and runs a
self test. The system defaults to B-Mode format.
Patient Registration Procedure
Begin an exam by entering new patient information.
Press the NEW PATIENT key at the beginning of each
patient study. A patient data entry menu appears on the
monitor. Enter Patient Identification (16 characters)
using alphanumeric keys, press
RETURN to go to the
Patient Name field (28 characters). Enter Patient Name.
Press RETURN or NEW PATIENT to register the inputs
and exit out of the menu
or
Press CLEAR to exit NEW PATIENT and abort entry if
required.