GE LOGIQ A100, Technical Publication

Page: 255 / 408

Configuration Using Control Keys
239
LOGIQ
t
α
100 User Manual
2211157–100 Rev 0
Biopsy Zone Display ON/OFF
The CONTROL B function toggles the biopsy lines
ON/OFF. Biopsy Lines are displayed as a dotted line on
the B-Mode image.
Press CONTROL
Press B for Biopsy Zone Display
Press ENTER to display the Biopsy guidelines on the
image. The biopsy zone angle designation is displayed
next to the probe name on the left side of the image
display.
NOTE: The Biopsy Zone Display can also be selected by
directly pressing the alphanumeric key ‘B’. The user
should not be in Comment mode when this function is
accessed.
For the C36, C55 and L76 probes, the biopsy zone
angles are SGL, MBX1, MBX2 and MBX3. The
guidelines are changed sequentially by selecting ‘N’.
For the E72 probe, the biopsy angle is TV0
_
or
TR5
_
(user selectable).
The selected biopsy zone angle designation is displayed
on the left hand side of the image display.
A message “Confirm BX type of Bracket” appears in
reverse video below the image.
B
Ctrl
Enter
Ctrl
Enter
.
.