GE LOGIQ A100, Technical Publication

Page: 301 / 408

Biopsy Procedures
285
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Biopsy Procedure
A typical biopsy examination might proceed as follows:
S
Ensure that all supplies for the biopsy procedure are on
hand before beginning the imaging session.
S
Prepare the patient for the biopsy procedure according to
accepted practices at your facility.
S
Explain the biopsy procedure to the patient, along with any
other instructions.
S
Prepare the probe, biopsy guide and probe sheath.
S
Follow the basic B-Mode scan procedures outlined in Scan
Procedures to locate the anatomical site to be biopsied.
Displaying Biopsy Guidelines
Activate Biopsy Guide Lines by pressing
CON-
TROL B or the alphanumeric key ‘B’ (user should
not be in Comment Mode when this function is
accessed).
Biopsy guidelines as shown in Illustration 55 gets
displayed on the screen.The selected biopsy
zone angle designation is displayed on the left
hand side of the image display.
NOTE: A message “Confirm BX type of Bracket”
appears in reverse video below the image.
The Biopsy Guidelines adjust with image adjustments,
such as image inversion/rotations, zoom and depth
changes.
B
Ctrl
Enter
Ctrl
Enter
.
.