GE LOGIQ A100 Technical Publication Download Page 38

Page: 38 / 408

Preparing the System for Use

LOGIQ

100 User Manual

2211157–100 Rev 0

Probe Connection

Use only approved probes. Probes can be connected or
disconnected from the system at any time regardless of
whether the system is powered ON or OFF.

Connecting a probe

1. Carefully unwrap the probe cord.

2. Do not allow the probe head to hang free. Impact

to the probe head could result in irreparable
damage.

3. Ensure probe ‘connector lock’ lever points

towards the 12 o’clock position. (See
Illustration 7.)

4. Align the connector with the probe port and

carefully push into place.

5. Turn the ‘connector lock’ to the 3 o,clock position

to secure the probe connector.

6. Carefully position the probe cord so that it is free

to move and is not resting on the floor.

When a probe is connected, the system will automatically
initialize the probe.

Until the Probe is connected to the system, a ‘?’ will
appear at the left top corner of the screen.

Summary of Contents for LOGIQ A100
























































































































































































































































































































































































































Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands

GE LOGIQ A100, Technical Publication

Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands