GE LOGIQ A100 Technical Publication Download

Page: 335 / 408

Maintenance

319

LOGIQ

100 User Manual

2211157–100 Rev 0

Weekly Check List (cont’d)

Do not clean the CRT filter and the monitor with
Isoprophyl Alcohol.

Use a soft, slightly moistened cloth to clean
the

keyboard controls. Use a toothpick to

remove solids around the

gain knob.

Clean the

foot switch with a soft,

non-abrasive, slightly moistened cloth with
non-abrasive soap and water solution.

Wipe the external surface of the foot switch
and dry with a soft, clean cloth.

Clean the

VCR with a soft clean dry cloth.

Clean the record and playback heads with a
soft non-abrasive cleaning system.

Do not use a wet cloth or any cleaning fluid because
it may enter and damage the unit.

For more information refer to the VCR’s
Operator Manual.

Turn OFF the power and, if possible,
disconnect the power cord before cleaning the
Video Graphic Printer.

Wipe the external surface with a soft, clean,
dry cloth.

Remove stubborn stains with a cloth lightly
dampened with a mild detergent solution.

Summary of Contents for LOGIQ A100
























































































































































































































































































































































































































Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands

GE LOGIQ A100, Technical Publication

Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands