GE LOGIQ A100 Technical Publication Download

Page: 124 / 408

Basic Measurements

108

LOGIQ

100 User Manual

2211157–100 Rev 0

Ellipse Method (cont.)

Use the

TRACKBALL to position the ellipse, as

necessary, and to size the active axis.

Press the top of the

NEAR (ELLIPSE) key to increase

the size of the inactive axis.
Press the bottom of the

NEAR (ELLIPSE) key to

decrease the size of the inactive axis.

Press

SET to complete the ellipse measurement and

record the circumference and area.
Four Circumference/Area measurements can be
displayed at the same time.

Use the

MEASUREMENT key to change the axis of

activation of the measurement cursors.

Alternate Ellipse Method

Press

FREEZE to stop image acquisition.

Press the

MEASUREMENT key once to display the

measurement menu and an open ended “ ” cursor
appears on the screen.

Use the

TRACKBALL to move the open ended “ ” cursor

to either end of the axis of the area to measure.

Press the

NEAR (ELLIPSE) up/down key, an ellipse

having an initial circle shape appears. Make ellipse
adjustments as previously described as necessary.

Hints

Meas

Summary of Contents for LOGIQ A100
























































































































































































































































































































































































































Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands

GE LOGIQ A100, Technical Publication

Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands