GE LOGIQ A100, Technical Publication

Page: 117 / 408

Basic Measurements
101
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Erasing Measurements
The following actions erase measurements from the
system’s memory:
S
If the Measurement has not been completed,
pressing
CLEAR once clears the current
measurement and the open ended cursor appears on
the screen. Pressing
CLEAR a second time clears
the open ended cursor. Pressing CLEAR a third time
clears all measurements on the screen and exits out
of the
Measurement menu.
S
If the Measurement is complete, pressing CLEAR
once clears all data from the display and exits out of
the
Measurement menu.
S
Pressing NEW PATIENT twice erases all
measurements and calculations on the display and
clears the report pages.
S
Adding a new measurement that exceeds the
maximum number of allowable measurements erases
the oldest measurements.
Measurement Key
The type of measurement depends on the current scan
mode and the number of times the
MEASUREMENT key
is pressed. If the MEASUREMENT key is pressed, the
open ended cursor will toggle between Distance
Measurement and trace. In the Distance mode, an open
ended calliper appears ( ) and in the trace mode a dot
cursor appears ( ).
Cursors
Once the measurement sequence is complete, the
cursor symbol changes to one of the seven symbols
shown below.
Illustration 30. Cursor Illustrations