GE LOGIQ A100 Technical Publication Download Page 107

Page: 107 / 408

Two Probe Port

LOGIQ

100 User Manual

2211157–100 Rev 0

Connecting Probes to the Two Probe Port (cont’d)

5. Align the connector with either of the ports and

carefully push in place.

6. Turn the probe connector lock in the clockwise

direction through one quadrant. The connector is
now secured to the two probe port.

7. Carefully position the probe cord such that it is

not put to undue stress.

8. Press the Switch key on the Two Probe Port to

switch to the connected port.

The LED toggles to indicate the probe change.

A click is also heard to indicate the switch over.

NOTE: Inadvertent pressing of the switch key

when

only one probe is connected causes the system to toggle
ports and any captured image will be lost.

ÂÂ

LED

audible click

Summary of Contents for LOGIQ A100
























































































































































































































































































































































































































Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands

GE LOGIQ A100, Technical Publication

Search results

Summary of Contents for LOGIQ A100

Reviews:

Related manuals for LOGIQ A100

Brands by name

Popular brands