GE LOGIQ A100, Technical Publication

Page: 150 / 408

OB Measurements
134
LOGIQ
t α
100 User Manual
2211157–100 Rev 0
Measurement Version Selection
The U.S., Tokyo University, Osaka University, European
and Australian versions can be selected by pressing
CONTROL–S1. The Installation Setup menu is displayed
and the preferred version can be selected. To select a
measurement version:
1. Press CONTROL–S1 ENTER. The Installation
Setup Menu is displayed.
2. Select OB Version
S
Press 1 for the U.S. Version
S
Press 2 for the Tokyo University Version
S
Press 3 for the Osaka University Version
S
Press 4 for the European Version
S
Press 5 for the Australian Version
3. Press SET to register any changes and exit out of
the menu or press CLEAR to abort entry and exit.
Available Measurements
While scanning, press MEASUREMENT to display the
OB measurement menu at the bottom of the screen. The
measurement selections for each version are:
MEAS: 1:GS 2:BPD 3:CRL 4:FL 5:LV 6:APTD&TTD 7:EDC 8:EFBW 0:NXT
1:C&A 2:VLM 3:HR 4:VEL 5:A/B 0:NXT
MEAS: 1:CRL 2:BPD 3:FTA 4:HL 5:FL 6:EDC 7:EFBW 0:NXT
1:C&A 2:VLM 3:HR 4:VEL 5:A/B 0:NXT
MEAS:1:BPD 2:HC 3:AC 4:FL 5:CRL 6:EDD 7:EFW 8:AFI 9:HIP 0:NXT
1:C&A 2:VLM 3:HR 4:VEL 5:A/B 0:NXT
Tokyo University Version
Osaka University Version
MEAS:1:GS 2:CRL 3:BPD 4:HC 5:AC 6:FL 7:BD 8:TAD 9:OFD 0:NXT
1:C&A 2:VLM 3:HR 4:VEL 5:A/B 6:Ft 7:EDD 8:EFW 9:HIP 0:NXT
European Version
US and Australian Versions
Illustration 32. Version Menu Selections