GCC Technologies Elite 21 Series, User Manual

Page: 79 / 311

2-29
The greyed out options are not available with this printer. The available options are as
follows:
• Setup AppleTalk... - Allows the printer’s AppleTalk network name and zone to
be set. Selecting a new AppleTalk name will allow users of multiple printers to
give each printer a distinctive name on the network.
• View Error Log - Shows a log of certain network-related errors experienced
by the printer.
• Setup TCP/IP & NetWare... - Allows TCP/IP and NetWare settings to be
made for the printer. This allows another configuration option for these settings
besides the printer’s front panel or WebAdmin.
• Configure Status Page... - Turns the printer’s automatic Network Status Page
on or off.
Online Driver Software Updates
The Elite 21 Series Macintosh software includes also installs a file called Elite 21
Updater into the Elite 21 Folder on your hard drive. This Updater is a utility which
automatically checks GCC’s web site for newer driver software and installs the new
software onto your system as needed. You should not need to run this Updater
during or immediately following the initial software installation onto your Macintosh.
You may wish to run the Updater periodically to check for software updates for the
printer. This updater requires an Internet connection, so be sure that your Macintosh
is setup for Internet access before running the Elite 21 Updater utility.