GCC Technologies Elite 21 Series User Manual Download

Page: 115 / 311

4-22

Halftoning

allows you to use custom halftone values, or use the printer’s defaults.

Print as Negative Image

reverses the black and white areas in the document.

Print as Mirror Image

switches the output to a mirror image of the original.

Scaling

selects page scaling for the document. This value can be set to between 25% and 400%.

Click OK to accept any changes to these settings.

Clicking on the

Device Options

tab of the Properties window brings up the following window:

Summary of Contents for Elite 21 Series
























































































































































































































































































































Search results

Summary of Contents for Elite 21 Series

Reviews:

Related manuals for Elite 21 Series

Brands by name

Popular brands

GCC Technologies Elite 21 Series, User Manual

Search results

Summary of Contents for Elite 21 Series

Reviews:

Related manuals for Elite 21 Series

Brands by name

Popular brands