GCC Technologies Elite 21 Series, User Manual

Page: 196 / 311

8-21
Field Description
Enable NetWare Print Indicates whether the NetWare printer has
Server been enabled.
If the box is not checked, the printer has not been
enabled for NetWare. All other fields on the screen will
be shaded.
If the box is checked, the printer has been enabled for
NetWare and you can make entries in the other fields.
Print Server Name Indicates the NetWare print server name which the
printer uses to log into NetWare. You can enter a name
which does not already exist in the network directory or
server bindery.
The maximum field length is 48 characters.
Print Queue Scan Rate Specifies the rate at which a printer will poll print queues
for a new print job. For example, if you place 1 in the
field, the printer should poll for new print jobs every 1
second.
The minimum value for this field is 1 and the maximum is
250.
Print Server Password Indicates the password for a printer
and Print Server which will be used to log into NetWare.
Password Retype When you change this field, NWSetup will set the
password in both NetWare and the printer.
The maximum length for this field is 32 characters.
Both the Password and Password Retype fields must be
identical before a user is allowed to Finish this screen.
Ethernet Frame Type Indicates the Ethernet frame type that should be used by
the NetWare protocol stack by default. Only one frame
type can be selected.
Enable NDS Mode Indicates whether the printer support Directory
Services. When the box is checked, Directory Services is
supported.
If this box is not checked, then all other fields on this
screen will not be enabled.