GCC Technologies Elite 21 Series, User Manual

Page: 74 / 311

2-24
Auto Select - Sends job to the tray on the printer
holding the paper size specified in the document.
Tray 1 - Sends the job to the Multi-Purpose Feeder
(Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower paper
tray of the printer (Tray 2) or an additional lower
paper tray (Tray 3-4), if present. Trays that are not
installed are greyed out.
Envelope Feeder - Sends the job to the envelope
feeder. Greyed out unless the feeder is installed.
Manual Feed - Sends the job to the Multi-Purpose
Feeder (Tray 1). You will be prompted to press the
Select button on the front panel before the job is
printed.
This pull-down menu also contains selections for Paper
Type (Plain Paper, Preprinted, Letterhead,Transparency,
Prepunched, Labels, Bond, Recycled, Color, Card Stock,
Rough, Normal 1, 2 and 3 and Thick 1 and 2). Select
the appropriate type for each source, or use Auto
Select to automatically select the paper type.
These settings are used to automatically direct output
to the correct tray, or to adjust the fusing temperature
of the printer for certain media types. See the
“Sending Jobs and Adjusting Fuser Temperature by
Paper Type” section of Chapter 10 for more
information.
The Paper Source options also allow a different source
to be specified for the first page of a document than
for the remaining pages. This is useful when printing
correspondence with the first page on letterhead and
remaining pages on plain paper, for example. To print
the first page from a different source, select a Paper
Source for both the “First Page From” and “Remaining
From” categories. Otherwise, select “All From” to
print all pages from the same tray.