GCC Technologies Elite 21 Series, User Manual

Page: 222 / 311

8-47
Setting Up System V Release 4 and Solaris 2.X to Use lpd/lpr
If your system recognizes the LPSYSTEM command, you can use lpd/lpr. Another
option is the admintool if your system supports it.
LPSYSTEM Installation
Use the following procedures to install LPSYSTEM:
Note: The following must be executed from the Bourne Shell. Type:
SH e
to
enter the Bourne Shell program.
• Type:
lpsystem -t bsd <IP_address_of_Printer>
Enter Printer host name in /etc/hosts file. Your system may want its IP address
instead of the remote host name.
• Type
lpadmin -p <local printername> -s <remote host
name or IP address>!PORT1
Note: There is no space after the remote host name.
• Enable <local printername>
• Accept <local printername>