8-43
Setting Up an HP/UX Remote Printer to Use lpd
Set up a remote printer on the host that sends jobs to a Print Server Card using the
Print Server Card lpd. To do this:
• At the prompt, type: sam
• When a window appears, select Printer/Plotter Manager.
• When the menu appears, select List printer and plotters.
• When a list appears, select Actions in the title bar.
• From the pull-down menu, select Add Remote Printer.
• When a window appears, add values to configure the printer. See the following
example.
Input Requested
Example
Description of Input Data
Printer Name
myprinter
name to be used in lp command
Remote System Name
fastprint
Printer hostname as in /etc/hosts
Remote Printer Name
PORT1
lpd queue name
• At the bottom of the screen, select Remote Printer is on BSD system from the
three choices available.
• Click on the OK button.
• Ping the unit to test communications. Type:
ping <Printer IP address>
• Ping should confirm your IP address with the message:
<Printer IP address> is alive
If the connection is confirmed, you can now print.
Summary of Contents for Elite 21 Series
