GCC Technologies Elite 21 Series, User Manual

Page: 158 / 311

6-12
Paper Source: Specifies which paper tray the paper is to be drawn from. The
options on the pull-down menu are as follows:
Auto Select - Sends job to the tray on the printer holding the paper size specified in the document.
Envelope Feeder - Sends the job to the envelope feeder. Greyed out unless the feeder is installed.
Manual Feed - Sends the job to the Multi-Purpose Feeder (Tray 1).
Tray 1 - Sends the job to the Multi-Purpose Feeder (Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower paper tray of the printer (Tray 2) or an additional
lower paper tray (Tray 3-4), if present.
Copy Count: Selects the number of copies of the document to be printed.
Orientation: Selects the page orientation, Portrait, Landscape or Rotated, by clicking on the
appropriate radio button.
Print on Controls double-sided (duplex) printing if your printer is equipped with the
Both Sides: optional Duplex Printing Unit. To enable duplexing, click the appropriate binding
method (Short Side or Long Side). The printer will automatically print the double-sided
pages accordingly.
Clicking on the Advanced tab brings up additional printer options, shown on the next page. Many of
these options are duplicated from the Page Setup and/or Print windows and can be set here, or in those
windows. Options which can only be set from this section include the following:
Resolution: Selects the resolution of the print job, 600 or 1200dpi.
Scaling: Selects page scaling for the document. This value can be set to between 25% and
400%.
TrueType Sets whether TrueType fonts are substituted with equivalent resident fonts
Font: in the printer, or downloaded with the print job.
Mirrored Prints job as mirror image
Output:
Negative Reverses black and white in the document.
Output: