GCC Technologies Elite 21 Series User Manual Download

Page: 283 / 311

11-29

Repeating marks

White spots

Toner smears when
rubbed

The paper path is dirty.

The toner cartridge is old or
damaged.

Print several blank sheets.

Replace the toner cartridge.

The paper is out of
specification.

The toner cartridge is old or
damaged.

Replace the paper with
recommended media.

Replace the toner cartridge.

The paper is moist.

The paper is out of
specification.

The front cover is not fully
closed.

Remove the moist paper and
load new, dry paper.

Replace the paper with
recommended media.

Close the front cover
properly.

Description

Possible Cause

Solution

Black page

The toner cartridge is old or
damaged.

The high voltage power
supply may be defective.

Replace the toner cartridge.

Contact GCC Technical
Support, your dealer or an
authorized GCC service
center.

Summary of Contents for Elite 21 Series
























































































































































































































































































































Search results

Summary of Contents for Elite 21 Series

Reviews:

Related manuals for Elite 21 Series

Brands by name

Popular brands

GCC Technologies Elite 21 Series, User Manual

Search results

Summary of Contents for Elite 21 Series

Reviews:

Related manuals for Elite 21 Series

Brands by name

Popular brands