GCC Technologies Elite 21 Series, User Manual

Page: 220 / 311

8-45
Setting Up a DEC ULTRIX 4.3 RISC or OSF1/ALPHA Remote Printer
Set up a remote printer on the host that sends jobs to a printer.
• At the prompt, type:
lprsetup
• Select add.
• Enter a name for your printer and press [Enter].
• “Do you want more information on specific printer types?" Press [Enter].
• A list of ULTRIX-supported printers is listed. Type remote and press [Enter].
• Enter a printer synonym (alias) and press [Enter].
• Designate a spooler directory and press [Enter], or accept the default spooler
directory displayed and press [Enter].
• Designate a remote system name and press [Enter].
• Designate PORT1 as the remote system printer name and press [Enter].
• You are asked to enter the name of a printcap symbol from a displayed list. Type Q
and press [Enter].
• Your configuration is displayed. You are asked whether these values are final. Type Y
or N and press [Enter]. An example is shown below.
Printer #7 Symbol Type Representative Value
lp (line printer) STR
rm (remote host)STR Printer_host
rp (remote printer) STR PORT1
sd (spooler directory) STR /usr/spool/lpd7
• Add comments to the printcap file. For example, you can type:
Dick's printer down the hall [Enter]
• Select exit to save your configuration and press [Enter].
You are now prepared to print.