GCC Technologies Elite 21 Series, User Manual

Page: 110 / 311

4-17
The Page Setup Window contains the following options for selection:
Paper Size: Selects the Paper Size being printed to. This pull-down menu brings up a list of paper
sizes supported by the Elite 21 printer
Paper Source: Specifies which paper tray the paper is to be drawn from. The options on the pull-
down menu are as follows:
Auto Select - Sends job to the tray on the printer
holding the paper size specified in the document.
Envelope Feeder - Sends the job to the envelope
feeder. Greyed out unless the feeder is installed.
Manual Feed - Sends the job to the Multi-Purpose
Feeder (Tray 1). When sent, the job will prompt for
paper before printing.
Tray 1 - Sends the job to the Multi-Purpose Feeder
(Tray 1) of the printer
Tray 2-4 - Sends the job to the standard lower paper
tray of the printer (Tray 2) or an additional lower
paper tray (Tray 3-4), if present.
Orientation: Selects the page orientation, Portrait or Landscape, by clicking on the appropriate
radio button.
Margins: Selects left, right, top and bottom margins for the document.
After making all necessary selections in this window, click Finish to accept the settings and apply them
to the document.