GCC Technologies Elite 21 Series User Manual Download

Page: 285 / 311

11-31

Plotted print

Vertical blanks

Blurred print

The paper is out of
specification.

The paper is moist.

The toner cartridge is old or
damaged.

Replace the paper with
recommended media.

Remove the moist paper and
load new, dry paper.

Replace the toner cartridge.

The toner cartridge is not
installed correctly.

The toner cartridge is old or
damaged.

Remove the toner cartridge
and re-install it.

Replace the toner cartridge.

The toner cartridge is old or
damaged.

Replace the toner cartridge.

Description

Possible Cause

Solution

Bold print appears
shaded.

The toner cartridge is old or
damaged.

Replace the toner cartridge.

Summary of Contents for Elite 21 Series
























































































































































































































































































































Search results

Summary of Contents for Elite 21 Series

Reviews:

Related manuals for Elite 21 Series

Brands by name

Popular brands

GCC Technologies Elite 21 Series, User Manual

Search results

Summary of Contents for Elite 21 Series

Reviews:

Related manuals for Elite 21 Series

Brands by name

Popular brands