Fujitsu Server PRIMERGY TX1330 M1, Upgrade And Maintenance Manual

Page: 95 / 336

TX1330 M1
Upgrade and Maintenance Manual 95
Basic software procedures
Ê
Under
System Overview
, click
Identify LED Off
to switch off the ID indicators.
Using ServerView Operations Manager
Ê
In ServerView Operations Manager Single System View and press the Locate
button in the title bar to switch off the ID indicator.
5.2.19 Specifying the chassis model
In order to have your server displayed correctly as a rack system in the
ServerView management user interface after a chassis conversion, the chassis
model setting needs to be updated.
This can be accomplished using the ServerView Installation Manager or
Maintenance Tools:
Using the ServerView Installation Manager
Ê
Boot the system from the ServerView Suite DVD. The ServerView
Installation Manager is being started.
Ê
Select your preferred user interface language.
Ê
Under Status backup media select No status backup and click Continue .
Ê
Select Maintenance .
Ê
Select Server Configuration Manager .
Ê
Check the box for rack model and save the setting by clicking Save .
Using the ServerView Maintenance Tools
On Windows-based servers with ServerView agents installed, proceed as
follows:
Ê
Click
Start
, point to
All Programs
, and then point to
Fujitsu
-
ServerView Suite
-
Agents
-
Maintenance Tools
.
Ê
In the Maintenance Tools menu pane, click the Chassis Model Configuration tab.
Ê
Under Convert to click the Rack Model button.
Ê
Click Exit to close the Maintenance Tools menu pane.