Fujitsu Server PRIMERGY TX1330 M1, Upgrade And Maintenance Manual

Page: 24 / 336

24 Upgrade and Maintenance Manual
TX1330 M1
Before you start
V
CAUTION!
The device may be seriously damaged or cause damage if it is opened
without authorization or if repairs are attempted by unauthorized and
untrained personnel.
Components that are handled as Upgrade Units
– Processors (upgrade kits)
– Optical disk drives
– Backup drives
– Expansion cards
– Battery backup units
– Memory modules
– USB Flash Module (UFM)
Components that are handled solely as Repair Units
– CMOS battery
– Non hot-plug fans
– Non hot-plug hard disk drives
2.1.3 Field Replaceable Units (FRU)
Removing and installing Field Replaceable Units involves complex maintenance
procedures on integral server components. Procedures will require shutting
down, opening and disassembling the server.
V
CAUTION!
Maintenance procedures involving Field Replaceable Units must be
performed exclusively by Fujitsu service personnel or technicians trained
by Fujitsu. Please note that unauthorized interference with the system
will void the warranty and exempt the manufacturer from all liability.
Components that are handled as Field Replaceable Units
– Processor (replacement)
– SAS / SATA backplanes
– Power distribution board
Field Replaceable Units (FRU)