22
2.1
Using the Scanner Buttons
2.1.1 Using the Startup Button
When the scanner is off or in standby mode, pressing the startup button will start the scanner up
and display the "Login" screen.
* Other than pressing the startup button, any of the following operations will open the "Login"
screen:
•
Loading the document in the ADF paper chute.
•
Closing the top cover.
•
Pressing a keyboard key.
The idle time before standby mode entered can be changed. For details, refer to
Time to Standby Mode" (page 57)
.
ATTENTION
When the scanner is starting up or in standby mode, be careful to never
hold the startup button down for four seconds, as this will cause the scanner
to shutdown. If this happens, saved scanned data may become unusable.
If the startup button is accidentally held down too long, causing the scanner
to shutdown, temporally detach the AC adaptor to ensure that the power is
completely off.
After turning the power off, wait for at least ten seconds before turning the
power back on again. To shutdown the scanner correctly, press the [Shut-
down] button on the "Login" screen.
Login Screen
Operating
Standby
Shutdown
Login
No operation
for set period
Operation Screens
Press Button(*)
Press Button
LED Dark
LED Lit
LED Blinking
Summary of Contents for FI-6000NS
