Fujitsu FI-6000NS, Operator'S Manual

Page: 338 / 437

310
4 In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", [Secu-
rity] tab, the security level for the corre-
sponding zone is set as "high", or in
[Custom Level], "Scripting", "Active
Scripting" is set to "Prompt" or "Disable". When connecting using the scanner name,
the connection will be an intranet connec-
tion. When connecting using an IP
address, it will be an internet connection.
If the URL includes a scanner name, the
scanner will be connected using an Intra-
net Zone. If the URL includes an IP
address, the scanner will be connected
using the Internet Zone.
In Microsoft® Internet Explorer, in the
"Tools" menu, "Internet Options", try the
following settings for the corresponding
zone.
•
To enable "Active Scripting", set in one of
the following ways:
•
In the [Security] tab, set the required
"Security level for this zone" to
"Medium".
•
In the [Security] tab, click the [Custom
Level] button. Then, set the "Script-
ing", "Active Scripting" to "Enable".
•
If connecting via the Internet zone, on the
[Privacy] tab, set the level to below
"Medium High".
After the above settings have been per-
formed, in "Temporary Internet Files",
press the [Delete Cookies] button to delete
all temporary internet files.
5 The scanner is in standby mode. Press the startup button to start the scan-
ner.
6 A proxy server is being used. Set the proxy server to not be used. Open
the "Internet Options" in the "Tools"
menu of Microsoft® Internet Explorer,
then press the [LAN Settings] button in
the [Connections] tab and remove the
check from the "Use a proxy server for
your LAN (These settings will not apply to
dial-up or VPN connections)" option.
HINT
This scanner is installed with a LAN card which supports the Wakeup on LAN
function. If the last time the scanner power was turned off was due to an error or
power failure, the Wakeup on LAN function will not work.
No. Problem Action