Fuji Xerox DocuCentre S2110 User Manual Download Page 39

Page: 39 / 229

Installing the Print Driver/Scan Driver

Environme

t Se

ttings

Installing the Print Driver/Scan Driver

To enable the machine to print and scan, you need to install respective drivers on your
computer.

The following drivers are included in the Media (Software/Product Manual).

The Media (Software/Product Manual) offers the two types of installation menus: Quick
Setup and Custom Installation.

Quick Setup allows you to install easily the following drivers and software:

Print Driver

Scanner Driver

Print & Scan Hub

* : For more information, refer to "Using Print & Scan Hub" (P.40).

To install a specific driver, use the Custom Installation menu.

Reference

For more information, refer to the Media Information included in the Media (Software/Product Manual).

Driver Name

Description

Print Driver

The recommended print driver for this model

Common Print Driver

The V4 print driver which can be used commonly for various models

Common Print Driver is suitable for printing from Windows store
applications such as Microsoft Edge.

Some features are not available for printing from desktop
applications.

Common Print Driver is available only for Windows 8.1 or later.

Scanner Driver

Includes the following:

TWAIN-compatible Scan Driver

Windows Image Acquisition (WIA)-compatible Scan Driver

Scanner Connection Tool

Summary of Contents for DocuCentre S2110





































































































































































































































Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands

Fuji Xerox DocuCentre S2110, User Manual

Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands