Fuji Xerox DocuCentre S2110 User Manual Download Page 210

Page: 210 / 229

Problem Solving

210

Problem

Solving

If you cannot find the document in Step 8, lift up the document feeder tray and remove the
document.

Carefully move the document feeder tray back into position.

Make sure that the document is not torn, wrinkled, or folded, and then reload the
documents to complete the job.

After removing the jammed document:

Copy:

Place the unscanned document again including the jammed pages.

Scan (TWAIN/WIA(Windows Image Acquisition)):

Place the unscanned document again including the jammed pages.

Note

Torn, wrinkled or folded document pages can cause document jams, or damage. Always copy torn, wrinkled,
or folded documents by placing them directly on the document glass.

Summary of Contents for DocuCentre S2110





































































































































































































































Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands

Fuji Xerox DocuCentre S2110, User Manual

Search results

Summary of Contents for DocuCentre S2110

Reviews:

Related manuals for DocuCentre S2110

Brands by name

Popular brands