Fuji Xerox ApeosPort 350 I, User Manual

Page: 94 / 609

3 Copy
92
Copy
3
Features that can be set in Build Job
„ Finishing
For information on the feature, refer to "Finishing (Outputting by Specifying Finishing)" (P.73).
„ Booklet Creation
For information on the feature, refer to "Booklet Creation (Creating a Booklet)" (P.75).
„ Covers
For information on the feature, refer to "Covers (Attaching a Cover to Copies)" (P.77).
„ Annotation
For information on the feature, refer to "Annotation (Adding Stamp/Date/Page Number to Copies)"
(P.82).
„ Set Numbering
For information on the feature, refer to "Set Numbering (Printing Control Number on the Background)"
(P.86).
[Copy Job] Screen
The following describes the screen that appears while the Build Job is being executed.
„
Chapter Start...
Displays the [Build Job - Chapter Start/Separators] screen.
Refer to "[Build Job - Chapter Start/Separators] Screen" (P.93).
„ Change Settings...
The Copy screen appears and you can change the settings for the loaded document.
After setting the features, press the <Start> button on the control panel to start
scanning of the document.
„ Cancel
The document data stored by the Build Job feature is cleared and the job is canceled.
Note • The same operation is performed if you press the <C> button or <Clear All> button on the
control panel.
„ Last Original
Select this item to end scanning of documents. The build job starts.
„ Next Original
Select this item when you have another document. This item is selected when using
the Build Job feature.
„ Start
When you load the next document and press the <Start> button, the machine starts to
scan the loaded document.
Note • The same operation is performed if you press the <Start> button on the control panel.