Fuji Xerox ApeosPort 350 I, User Manual

Page: 476 / 609

16 Problem Solving
474
Probl
em
So
lving
16
016-703
O [Cause] Received e-mail specifying a non-registered or invalid
mailbox number.
[Remedy] Take one of the following actions:
z
Create a new mailbox with the specified number and
request the sender to send it again.
z
Request the sender to send to a valid mailbox.
016-704
O [Cause] The mailbox is full, and hard disk capacity is insufficient.
[Remedy] Remove unnecessary documents from the mailbox, and
save the document.
Refer to "Printing/Deleting Documents in the Mailbox" (P.198).
016-705
O [Cause] Unable to register the Secure Print document because a
HDD is unattached.
[Cause] A HDD is required for the Secure Print feature.
Refer to "Secure Print" (P.375).
016-706
O [Cause] The hard disk space is insufficient because Secure Print
users exceeded the allowed number.
[Remedy] Remove unnecessary documents from the machine, and
delete unnecessary Secure Print users.
For information on deleting Secure Print users, refer to "Secure Print"
(P.375). For information on deleting documents, refer to "Printing/Deleting
Documents in the Mailbox" (P.198) and "Printing and Deleting Stored
Documents" (P.373).
016-707
O [Cause] Unable to print with the Sample Print feature because a
HDD is unattached or defective.
[Remedy] A HDD is required for the Sample Print feature. If the
HDD is defective, contact our Customer Support Center.
016-708
O [Cause] Unable to annotate due to insufficient hard disk space.
[Remedy] Remove unnecessary data from the hard disk to increase
free disk space.
016-710 O [Cause] Unable to register the Delayed Print document because a
HDD is unattached.
[Remedy] A HDD is required for the Delayed Print feature.
016-711
O Refer to 016-985.
016-712
O Refer to 003-751.
016-713
O [Cause] The input password does not agree with the password set
to the mailbox.
[Remedy] Input the correct password.
016-714 O [Cause] The specified mailbox does not exist.
{Remedy] Create a new mailbox or specify an existing mailbox.
016-716
O [Cause] Unable to spool the TIFF file due to insufficient disk
space.
[Remedy] Remove unnecessary documents and users from the
machine, and then attach the hard disk. For information
on attaching the hard disk, contact our Customer Support
Center.
Refer to "Printing/Deleting Documents in the Mailbox" (P.198).
Error Code
Category
Cause and Remedy
C P F S M O