Fuji Xerox ApeosPort 350 I, User Manual

Page: 359 / 609

System Administrator Settings
357
Syste
m
Settings
11
System Administrator Settings
In [System Administrator Settings], you can set the system administrator ID and
password.
You are recommended to set the system administrator ID and password to prevent
setting changes and ensure security.
The following shows the reference section for each item.
System Administrator Login ID............................................................................................... 357
System Administrator Password .............................................................................................. 358
Maximum Login Attempts ....................................................................................................... 358
1
In the [System Settings] screen,
select [System Administrator
Settings].
For the method of displaying the [System
Settings] screen, refer to "System Settings
Procedure" (P.250).
2
Select the feature to be set.
System Administrator Login ID
You can set the system administrator user ID. Enter the ID from 1 to 32 characters.
Important • Do not forget a new system administrator ID when the system administrator ID has been
changed. No measure is available for forgetting the system administrator ID.
Note • The default system administrator ID is “11111”.
1
Select [System Administrator Login
ID].
2
Select [On].
3
Select [Keyboard], then in [New
System Administrator Login ID],
enter the system administrator ID, and select [Save].
4
Select [Keyboard] once more, and in [Re-enter System Administrator Login ID], enter
the same system administrator ID, and select [Save].
5
Select [Save].