Fuji Xerox ApeosPort 350 I, User Manual

Page: 271 / 609

Common Settings
269
Syste
m
Settings
11
Line Monitor Volume
You can relay the sound on the telephone circuit in the interval from dialing until the
connection is made through the speakers on the machine. This is convenient for using
Fax Information Services without using the telephone.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound,
select [Off].
Ringing Volume
Select the sound to be made when an incoming call arrives at the machine.
You can select the volume from [Soft], [Normal], and [Loud] To disable the sound,
select [Off].
Stored Programming Tone
Select the sound to be made during while a stored program is registered.
You can select the volume from [Soft], [Normal], and [Loud].
Note • It is not possible to disable this sound.
Auto Clear Alert Tone
Select the sound to be made at 5 seconds before automatically returning to the initial
screen, when the auto clear feature is enabled.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound,
select [Off].
Base Tone
For a button that toggles (changes setting each time it is pressed), set the sound to be
made when in the home position. The machine makes this sound when the <Interrupt>
button is released.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound,
select [Off].
Screen Defaults
Set the initial screen.
1
Select [Screen Defaults].
2
Select the item to be set or
changed, and select [Change
Settings].
Note • Select [ ] to return to the
previous screen or [ ] to move to the next screen.
3
Set the setting value.
4
Select [Save].