Foma N901iS, User Manual

Page: 314 / 580

312
i-
α
ppli
<Stand-by set>
Setting the i-
α
ppli Standby Screen
Use this function to set a selected i-
α
ppli software as the standby screen on your FOMA terminal.
When the i-
α
ppli standby screen is shown, the “ ” or “ ” icon appears at the bottom of the screen.
● Only 1 i-
α
ppli can be set as the i-
α
ppli standby screen.
●
The “Web To function” (P.215) cannot be used from the i-
α
ppli standby screen.
● Some software applications cannot be set as the standby screen.
1
Software list screen (P.304)
p
(FUNC) “Software setting”
“Stand-by set” “ON”
o
(Finish)
Switching the i-
α
ppli standby screen to the
α
ppli mode
Use this procedure to launch the software application set in the i-
α
ppli standby screen.
1
On i-
α
ppli standby screen
t
The i-
α
ppli starts up and the “ ” or “ ” icon at the bottom of the screen changes to a flashing “ ” or
“ ” icon.
Deselecting the i-
α
ppli standby screen <Deselect i-
α
ppli standby screen>
●
Deselecting the i-
α
ppli standby screen during
α
ppli mode
1 During
α
ppli mode
t
(1 second or longer) or
y
Select any
item:
NOTE
● The “ ” icon is displayed for software set in the standby screen.
● If software that communicates is set as the standby screen, it may not run correctly when problems such as poor signal
quality occur.
● If you select “OFF” for “Stand-by net” in “Software setting”, you may not be primed with timely provision of information.
● When an i-
α
ppli standby screen is set, the image set for the “Stand-by display” in “Display setting” (P.121) is not shown.
● If you display the standby screen while a menu function is running, the standby screen selected in “Display setting”
appears even when an i-
α
ppli standby screen has been set.
● If you turn the FOMA terminal off and then on again while you are setting an i-
α
ppli standby screen, a message appears
asking whether to launch the i-
α
ppli standby screen.
● If you set “All lock” (P.143) or “PIM lock” (P.147) while the i-
α
ppli standby screen is shown, the i-
α
ppli standby screen quits
and the standby screen set in “Display setting” appears. Once you release “All lock” or “PIM lock”, the i-
α
ppli standby
screen reappears.
NOTE
● Some software applications allow you to return from
α
ppli mode to the i-
α
ppli standby screen by using the FOMA
terminal’s keys while the i-
α
ppli standby screen is shown. However, you cannot return to the i-
α
ppli standby screen while
another menu function is running.
Item Description
Cancel Cancels i-
α
ppli standby screen deselection.
Ended Quits without deselecting the i-
α
ppli standby screen and restarts the i-
α
ppli standby screen.
Terminated Deselects the i-
α
ppli standby screen.
Ｅｎｄ Ｓｔａｒｔ